Nom du Produit: Brevini REM.D.RA.XO1G.00.4 Electronic Card
Marque: Brevini
Code Produit: REM.D.RA.XO1G.00.4
Mots-clés: Brevini
Electronic
REM.D.RA.XO1G.00.4 Electronic Card
Brevini REM.D.RA.XO1G.00.4 Electronic Card
Brevini Card
Brevini Card
Brevini REM.D.RA.XO1G.00.4 Card
REM.D.RA.XO1G.00.4 Electronic
REM.D.RA.XO1G.00.4 Card
Brevini Electronic
REM.D.RA.XO1G.00.4 Card
Brevini Electronic
REM.D.RA.XO1G.00.4 Electronic
Brevini Electronic Card
Electronic Card
Brevini REM.D.RA.XO1G.00.4
REM.D.RA.XO1G.00.4
REM.D.RA.XO1G.00.4 Electronic Card
Electronic Card
Êtes-vous intéressé par le produit Brevini REM.D.RA.XO1G.00.4 Electronic Card du fabricant Brevini avec le code REM.D.RA.XO1G.00.4? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Brevini REM.D.RA.XO1G.00.4 Electronic Card de notre équipe de support en direct maintenant!
he electronic control card type REM.D.RA has been designed to drive the ARON double solenoid proportional valves series “XD.*.C.. and XDP.3.C” without integral position transducer. The control card is enclosed in an “UNDECAL” type housing, a typical relay mounting standard. The output stage operates on the pulse width modulation principle (P.W.M.) and is provided with current feedback in order to obtain a solenoid output current proportional to the reference input signal. Output short circuit and supply polarity inversion protection is provided.Gain, minimum current and rise and fall ramp time adjustments are possible through the corresponding front panel trimming potentiometers, while the output current to the solenoid can be measured via the Valve Current test points, and the ramp operation can be excluded. The product incorporates a serial interface for adjustment of parameters.