Nom du Produit: CD Automation REVO E 3PH Thyristor power controller
Marque: CD Automation
Code Produit: REVO E 3PH
Mots-clés: CD Automation
Automation REVO E Thyristor controller
CD Automation REVO
Automation REVO E 3PH Thyristor
E 3PH Thyristor
CD Automation REVO 3PH Thyristor
REVO controller
CD REVO 3PH Thyristor
REVO E 3PH controller
CD REVO Thyristor power
E power
Automation E 3PH
Automation E 3PH Thyristor power
CD Thyristor
CD Automation REVO 3PH controller
CD REVO 3PH power
Automation Thyristor power controller
CD Automation REVO E 3PH Thyristor power controller
Automation E power
CD Automation E controller
Automation REVO 3PH controller
Thyristor power controller
Êtes-vous intéressé par le produit CD Automation REVO E 3PH Thyristor power controller du fabricant CD Automation avec le code REVO E 3PH? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour CD Automation REVO E 3PH Thyristor power controller de notre équipe de support en direct maintenant!
REVO E 3PH Thyristor Power Controller is for Inductive Loads, including Resistance, Kanthal Super (MoSi2 Element) or SiC element on Secondary of Transformer, an Universal and Digital Unit based on configurable powerfull microprocessor. It is possible to configure all inputs, the firing mode and control mode for all load type.SCR Power Controller suitable for most applications including Short Wave Infrared (SWIR) & Inductive load typesCurrent range – 35A, 45A, 75A, 100A, 125A, 150A, 225, 300A, 350A, 400A, 450A, 500AThree leg switching of 3/4 wire star or 3/6 wire delta loadsFully digital and user configurable for all inputs, firing modes, feedback modes and load typesFiring modes include zero crossing (ZC), burst firing (BF), single cycle (SC), soft start + burst firing (S+BF) and phase angle + soft start (S+PA)Microprocessor based electronic circuit fully isolated from powerUniversal input signal with automatic zero/span calibrationPower feedback or voltage compensationRS485 Comms MODBUS protocol as standardUnbalanced loadHeater break alarm to diagnose partial or total load failure and short circuitControl & monitor power, current & voltage via external keypad (CD-KP)IP20 ProtectionFrom 35 up to 500AMax. voltage 480V or 600V AC as optionDesigned to drive resistive, transformer loads and MoSi2 ElementsInputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.Firing mode: zero crossing, burst firing, single cycle, soft start + burst firing and phase angle + soft startN°1 Retransmission is available