ETP HYLOC 130 Hub-Shaft Connection

Nom du Produit: ETP HYLOC 130 Hub-Shaft Connection
Marque: ETP
Code Produit: HYLOC 130
Mots-clés: ETP ETP Connection ETP HYLOC 130 Connection ETP 130 HYLOC Hub-Shaft ETP HYLOC Hub-Shaft Connection HYLOC Hub-Shaft Connection HYLOC Connection HYLOC 130 ETP HYLOC 130 Connection ETP HYLOC 130 Connection HYLOC 130 Connection ETP 130 Hub-Shaft 130 Hub-Shaft ETP HYLOC HYLOC 130 Hub-Shaft ETP HYLOC 130
Hub-Shaft Connection

Êtes-vous intéressé par le produit ETP HYLOC 130 Hub-Shaft Connection du fabricant ETP avec le code HYLOC 130? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!

Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour ETP HYLOC 130 Hub-Shaft Connection de notre équipe de support en direct maintenant!

DÉTAILS DU PRODUIT

For heavy loads and quick mounting!ETP-HYLOC is a hydro-mechanical hub-shaft connection which, due to its robust design, is ideally suited to work in difficult environments and heavy operations like steel rolling mills, process industries etc. An interesting application, among many, has been fastening of feeding or forming rolls to shafts.ETP-HYLOC is fast to mount, has good concentricity and can take high torque and radial loads. Mounting and dismantling is easily carried out with a hydraulic pump.Construction ETP-HYLOC is a hydro-mechanical joint, which consists of a double-walled steel sleeve which encloses a conical moveable piston. Mounting and dismantling is carried out with a hydraulic pump. In the flange there are three threaded connections (”ON”, ”P” and ”OFF”) in the radial direction and the same in the axial. This makes it possible to choose radial or axial connection of the pump hoses, depending on the build-in situation. Operation When the piston is moved, by the hydraulic pressure from the pump, the double-walled sleeve expands uniformly against shaft and hub to form a rigid joint. When dismantling, the piston is moved in the opposite direction and the joint will loosen. A small amount of oil will be taken via spiral tracks in the piston between the surfaces (pressure applied through the ”P” connection), in this way making it easier for the piston to move. Normal working pressure is 1 000 bar.