Nom du Produit: Fife H3218 Center-Guide Detector
Marque: Fife
Code Produit: H3218
Mots-clés: Fife
H3218 Center-Guide Detector
Center-Guide Detector
Fife Center-Guide Detector
H3218 Detector
Center-Guide Detector
Center-Guide
Fife Center-Guide
Detector
Center-Guide
H3218 Detector
Detector
H3218 Center-Guide Detector
Fife H3218 Center-Guide Detector
Fife H3218 Detector
Fife H3218 Center-Guide
H3218 Center-Guide
Fife Center-Guide Detector
Center-Guide Detector
Êtes-vous intéressé par le produit Fife H3218 Center-Guide Detector du fabricant Fife avec le code H3218? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Fife H3218 Center-Guide Detector de notre équipe de support en direct maintenant!
The Fife H3218 center-guide detector provides a signal proportional to the center position of a strip of material; independent of material width. Two models of the H3218 are available; depending upon light source choice. The H3218 is for use with the H3137 family of fluorescent light sources. An enhanced version, the H3218E, is for use with the H3157E LED light source. Advanced signal processing allows the H3218 to discriminate between the pulsed light from either the H3137 or H3157 and other sources of light.H3218 Center-Guide Detector SpecificationsPower Requirements10 to 30 Vdc at 3.3 wattsAnalog Output:+/- 10 Vdc proportional to strip centerlineStatus Output:Contact closure indicates normal detector operationRecommended Gap with Light Source:2 to 10 feet0.6 to 3 metersSensor SizingSensor is sized based on minimum and maximum strip widths. Refer to selection chart for specific sensor model numbers.Three ConnectorsTwo for power and communications, one for H3218 analog outputLens MaterialsPolycarbonateOperating Temperature Range0 to 50° C32 to 122° FRecommended Passline (from light source to material)50% of gap