Nom du Produit: Friedrich FWO 42-2-2.1 Stoneware Vibrator Motor FW-Type
Marque: Friedrich
Code Produit: FWO 42-2-2.1
Mots-clés: Friedrich
FWO Vibrator Motor FW-Type
Stoneware Motor FW-Type
Friedrich FWO Vibrator FW-Type
Friedrich FWO Stoneware Vibrator Motor
42-2-2.1 Stoneware Motor
Friedrich FWO 42-2-2.1 FW-Type
Friedrich Stoneware Vibrator
42-2-2.1 Vibrator
Friedrich 42-2-2.1 Motor FW-Type
Friedrich FWO Stoneware Vibrator Motor FW-Type
Friedrich 42-2-2.1 Vibrator FW-Type
Friedrich Vibrator FW-Type
Friedrich FWO Stoneware Motor FW-Type
42-2-2.1 Vibrator Motor FW-Type
FWO 42-2-2.1 Stoneware Vibrator
Friedrich FWO 42-2-2.1 Vibrator
Friedrich FWO Stoneware Vibrator Motor FW-Type
Friedrich FWO Stoneware Motor
FWO Vibrator
Stoneware Vibrator Motor FW-Type
Êtes-vous intéressé par le produit Friedrich FWO 42-2-2.1 Stoneware Vibrator Motor FW-Type du fabricant Friedrich avec le code FWO 42-2-2.1? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Friedrich FWO 42-2-2.1 Stoneware Vibrator Motor FW-Type de notre équipe de support en direct maintenant!
General specificationsStock:The built-in special cylindrical roller bearings with increased load capacity and clearance, are lubricated with a special grease for life.Power Supply:Voltages from 115 V to 690 V available in 50 HzDegree of protection:IP 54Thermal class:F (155 °C) according to DIN EN 60034-1Tropical insulation:StandardElectrical connection:Use high flexible cable for heavy mechanical stress.Example: H07RN-F or A07RN-F according to DIN VDE 0282.Permissible ambient temperature:-20 to +40 °COperating mode:Continuous operation (S1) and discontinuous operation at 100 % centrifugal force.Assembly:Without limitation, motors can be mounted in any position.Color coating:Standard RAL 6011. Other colors available on request.Type code:The type code is read as follows:First block number = working moment in kgcm(working moment = 2 x static moment)This is followed by a hyphen and then the pole number.Where: 4 = 1460 rpm 6 = 980 rpm (at 50 Hz mains frequency).Behind the second dash, the size is specified.