Megger PIL 8 Cable and Phase Identifier

Nom du Produit: Megger PIL 8 Cable and Phase Identifier
Marque: Megger
Code Produit: PIL 8
Mots-clés: Megger Megger Cable and Megger Phase Identifier Megger Identifier PIL Cable Megger PIL Phase Megger PIL and Megger and Phase Megger 8 Cable and Megger 8 Cable and Phase PIL Cable Phase Identifier Megger Cable Phase Identifier PIL Cable Identifier Megger Cable and Identifier Megger PIL 8 Identifier Megger PIL Cable and Megger PIL Phase Identifier Megger Cable and Phase Identifier Megger PIL 8 Cable 8 Cable Phase Identifier
Cable and Phase Identifier

Êtes-vous intéressé par le produit Megger PIL 8 Cable and Phase Identifier du fabricant Megger avec le code PIL 8? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!

Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Megger PIL 8 Cable and Phase Identifier de notre équipe de support en direct maintenant!

DÉTAILS DU PRODUIT

Maintenance free transceiver clamps Suitable for any type of switchgear Requires only one person Easiest operation Absolute safe phase identification The phase identification system PIL8 permits a fast and especially safe phase determination at the jointing location during the mounting of medium voltage cables. According to DIN VDE 0105 0100 part 2 (EN 50110-1) from Oct. 1997, Pos. 6.2.4.1 Topic 3 (Page 12) it specifies : “... If the earthing or shorting has to be removed for the duration of measurements or tests, suitable other safety measures have to be taken.” Such safety measures take a lot of effort and are not always practical. PIL 8 requires that the ground or shorting must not be removed. On the contrary, this grounding is an essential part of the procedure, which means, the cable must be grounded and shorted for the system to work with the result that test is absolutely safe. For each phase the corresponding transceiver clamp is installed on the grounded cable end and then at the selection point each phase is identified and marked.