Nom du Produit: Santerno CU400 Per Elettromagneti For DCREG Converter AC/DC
Marque: Santerno
Code Produit: CU400 Per Elettromagneti
Mots-clés: Santerno
CU400 Per Elettromagneti For Converter AC/DC
Santerno For Converter AC/DC
CU400 For Converter
Per Elettromagneti DCREG
CU400 Per DCREG Converter
Santerno CU400 Elettromagneti For Converter AC/DC
Per DCREG Converter AC/DC
Santerno Elettromagneti For DCREG Converter
Per Elettromagneti For Converter
Per Elettromagneti For
Per For DCREG Converter
Santerno CU400 Elettromagneti For Converter AC/DC
Santerno CU400 Elettromagneti AC/DC
Per Elettromagneti DCREG AC/DC
Elettromagneti DCREG
Santerno Per For DCREG AC/DC
Santerno Per For DCREG AC/DC
Converter
For DCREG Converter AC/DC
Êtes-vous intéressé par le produit Santerno CU400 Per Elettromagneti For DCREG Converter AC/DC du fabricant Santerno avec le code CU400 Per Elettromagneti? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Santerno CU400 Per Elettromagneti For DCREG Converter AC/DC de notre équipe de support en direct maintenant!
The DCREG, the thyristor converter by Santerno, may be used to power supply high inductive loads, such as electromagnets. The application issues due to this type of load have been fixed by a control algorithm specifically developed for DCREG4 converters. CLAMPING UNIT CU400 FOR DCREG The special algorithm implemented in the DCREG4 allows fixing application issues due to a ohmic resistor series-connected to a high value inductor. The CU400 protects the DCREG4 against overvoltages generated when the magnet current conduction mesh unexpectedly opens. When this happens, the energy accumulated in the magnet is “absorbed” and stored to a RC-type clamping circuit internal to the CU400: overvoltage is limited by a capacitor and dissipated by a resistor. To ensure efficient clamping functionality, the CU400 unit must be connected directly to the DC side of the converter.