im-tek.com

Tecsis EZE15 Aluminium Diecast Housing

Tecsis

Product Code: EZE15
Brand: Tecsis



GET OFFER: info@imtek.com.tr

Description for Tecsis EZE15 Aluminium Diecast Housing

Strain gauge amplifiers are used to transform the mV/V output-signals of strain gauges in amplified signals with a higher fault resistance. By the use of an amplifier it is also possible to connect sensors to displays and controlling units with the need for an amplified signal.  The model EZE15X004 is provided with a very robust housing and  two mounting bores in the housing allow to mount the amplifier at fitting locations. The die casting housing is designed for harsh environments according to protection class IP 67.FeaturesStrain gauge amplifier in robust field housing Outputsignals 0/4...20mA or 0...±10 V or 0...±5 V (3-Wire) Accuracy 0.02% of full scale Limit frequency up to 1kHz (-3db) for dynamic applications Also available with 5 KHz (-3db) or 10 kHz (-3db) (optional)Needed power supply 16-32 VDC (optional 8-16 VDC)Can be used with load cells with 100% Control-shuntCompact designZero point, span and filter arbitrary adjustableSmall design Protection class IP 67 ApplicationIn combination with force transducers or load cells the strain gauge amplifier EZE15X004 can be used in applications to measure forces or in industrial weighing. It is possible to connect all kinds of strain gauges with an output signal between 0.9 mV/V up to 3 mV/V. The internal sensor supply can be chosen by a switch and is either 5 or 10 VDC. Usually the amplifier is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. Because of the 3-wire analogue output with 4...20 mA, 0...10 V or 0...5 V and the needed supply energy for the amplifier between 16 and 36 V it is possbile to connect the amplifier directly to PLC. Those normaly come with matching analogue inputs which offer a supply energy of 24 V. There is also a version available which needs a supply energy between 8-16 VDC (not available for outputsignal 0...10 V).

Recommended Products For Tecsis


Tecsis F1224 Miniature Compression Load Cell From 1 kN
Tecsis F1101 Hydraulic Compression Force Transducer
Tecsis F2222 Tension/Compression Force Transducer
Tecsis F3831 Shear Beam
Tecsis EZE22 Digital Amplifier
Tecsis F1112 Hydraulic Compression Force Transducer
Tecsis F1145 Hydraulic Compression Force Transducer
Tecsis F53S1 Load Pin
Tecsis F1115 Hydraulic Compression Force Transducer
Tecsis F93C4 Wire Rope Force Transducer
Tecsis AZK01X711 Self-Aligning Bearing
Tecsis F9304 Wire Rope Force Transducer
Tecsis F1270 High-Capacity Load Cell
Tecsis E3907 Portable Measuring Instrument
Tecsis F1119 Hydraulic Compression Force Transducer
Tecsis EZE11 Strain Gauge Amplifier
Tecsis F6212 Ring Force Transducer
Tecsis F2226 Tension/Compression Force Transducer
Ebara DWC-V 500/3.0 Centrifugal Pump
Vogel MKU1-13AE12000 924 Single Line Pump
Tempco SILICONE RUBBER DRUM & PAIL HEATERS
Fisher ES and EAS Sliding-Stem Control Valve
Faulhaber DM0620SB008011 Stepper Motor
Vogel 40 Bar Diameter:40 MM Monometer
Vorwald 0078822 R/N:410/66308/4/0600 Spring
Eaton DG4V-3-6C-MU-H7-60 Valve
Habasit NHB-5EKBV Light Conveyor Belt
Wilkerson MTP-95-549
JVM JX 286-1460 Unbalance Motor
KSB UPF 80/30+UMAH 150-17/23 4.0 SQMM S.D Pump
Enerpac ZU4310RER Pump
Atlas Copco 1088 1001 01 Warning Mark
Alfa Laval 9612364819 VALVE SMP-BC W DN80 30 NC EPDM 316L
Air Dimensions M101 M-Series Dia-Vac® Pump Single Head Heated
Atos HMP-012/350 Valve
Fristam FP Series Centrifugal Pump
Stahl 8252/14-0EEEE-111 Terminal Box
SKF KFA1-W+924 Piston Pump With Container
Topworx DXS-L21GMEB162- 3/4 NPT, SPDT Seal, NAMUR 316 SS Shaft & Hardware, Standard 90°, D Series Valve Controller
Stahl 7621/11-1020-1110 Ex p System
Bernard Controls BCI0065389 AT6LLZTA 33 Actuator
Mp Filter HP0503A010ANP01 Filter