Nom du Produit: Woerner 463.246 Spray Lubrication System Control Unit
Marque: Woerner
Code Produit: Woerner 463.246 Spray Lubrication System Control Unit
Mots-clés: Woerner
Woerner Spray Lubrication
Woerner 463.246 Spray System Control
Woerner Spray Lubrication Control Unit
Spray System
463.246 Spray System Control
Lubrication Control Unit
Woerner 463.246 System Control Unit
Woerner 463.246 Spray Lubrication
Woerner 463.246 Lubrication System
Lubrication System Control Unit
Woerner Lubrication
Control
Woerner System Control
Lubrication Unit
Woerner System Unit
Woerner 463.246 Spray System Control Unit
Spray Lubrication
Spray Lubrication System Unit
Woerner Control Unit
Woerner Spray System Unit
Article: 463.246
Woerner 463.246 Spray Lubrication System Control Unit
Êtes-vous intéressé par le produit Woerner 463.246 Spray Lubrication System Control Unit du fabricant Woerner avec le code Woerner 463.246 Spray Lubrication System Control Unit? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Woerner 463.246 Spray Lubrication System Control Unit de notre équipe de support en direct maintenant!
Spray Lubrication System Control Unit 463.246 Application: Technical Data: Function: This control unit serves to control a spray lubrication system that follows progressive system operation. System switch-on and off is timedependent. Power consumption: 3,5 W Supply voltage: 24VDC - Voltage, inputs: 24 VDC Input resistance, inputs: 6,8 kR Temperature range: 0 50°C max 30 VDC; 5A Data protection: 10 years After control voltage switch-on, the unit is ready for operation. 15% to +20% (including residual ripple) Inputs response time: 5msec Protection degree: IP 20 Contact data, outputs: 250V AC at When contact is made, internal time lapse will start to run. When contact is broken, time lapse is stopped. In the absence of such contact, terminal I1 has to be bridged with +.