Zpa Pecky MON Series Electric Actuator

The MODACT ® MON actuators have been designed for changing position of control devices by reversing rotary motion (e.g. slide valves and other devices for which they are suitable in their characteristics). A typical example of application is remote two-position or multi-position control of devices which are required to close tight in their end positions.Technical dataMONType number52030520315203252033520345203552036 20-20063-160160-400 250-500320-1000630-20001000-4000Tripping force [kN]       Adjusting time [s/90°]       Position-changing velocity[min-1]7-807-1457-14516-10016-6345-10020-40[mm/min]       Working stroke[°]       [ot]2-2502-2502-2502-2402-2402-2401-100[mm]       Supply voltage1x 230 V, 50 Hz       24 V, 50 Hz       1 x 110 V, 50 Hz       3 x 230 / 400 V, 50 Hz???????ControlTwo position On-Off???without electronic brake?without electronic brake?without electronic brake?without electronic brake?without electronic brakeThree position???????Continuous       PROFIBUS       Position sensingResistance transmitter (R)???????Absolute       Current transmitter (I)???????Position interrupt???????Torque-initated interrupt???????Manual actuation???????Explosion-proof design       Type of enclosureIP 55IP 55IP 55IP 55IP 55IP 55IP 55Weight - depending on design (Al/cast iron) and on motor [kg]27-2941-5445-5890-9797-109211-217304-315UsageDepending on their design, the MODACT ® MON Control actuators can be fitted with a position regulator, reversing contactors, overcurrent motor protection and the BAM electronic brake. They can be used to adjust control devices working in control systems, depending on the value of analogue input signal of the position regulator. They can also be equipped with reversing contactors only or with reversing contactors and the BAM electronic brake.