Standardized
chemical pump in plastic

Pumps of the
CPDR and CPRF
type family are
horizontal, single-stage, end-suction, top-discharge centrifugal pumps, standardized to EN 22858
(formerly DIN 24256;
ISO 2858, NF 44-121, BS 5257 and ISO 5199).
The

installation length of type CPRF is simply longer
about the channel width
so that a free passage
for the fluid
is given. The pumps are used for handling chemically aggressive and/or inflammable liquids within the wide field of
chemical processing and environmental technology. The CPDR with
open impeller is foreseen for
clean liquids and fluids with a small content
of solids. The CPRF (Free
Flow) is able to handle fluids
with larger solids.
Both types are possible in close-coupled design instead of bearing block.

•  Capacities to 200 m³/h | 880 GPM

•  Heads to 100 m | 328 ft

•  Temperature ranges from

-40 °C to 190 °C | -40 °F to 374 °F

•  Pressures to 16 bar | 232 PSIG

Applications:

•  Brine

•  Chemical Wastewater

•  Chloralkali

•  Flue
gas scrubbers

•  Waste
incineration plants

•  Hydrochloric acid

•  Sea water

•  Steel industry

•  Sulphuric acid

Materials:

•  PP

•  PE 1000

•  PE 1000R

•  PVDF

•  PTFE