Mts Sensor ER-M-0400M-D34-1-V03

Mts Sensor

Product Code: ER-M-0400M-D34-1-V03
Brand: Mts Sensor



GET OFFER: info@imtek.com.tr

Description for Mts Sensor ER-M-0400M-D34-1-V03

OutputVoltage 0…10 VDC or 10…0 VDC, 0…10 VDC and 10…0 VDC (controller input resistance RL > 5 k?)Current 4…20 mA or 20…4 mA (minimum / maximum load: 0 / 500 ?)Measured value PositionMeasurement parametersResolution InfiniteCycle time Typ. 0.3 ms < t < 2 ms (depending on stroke lengths)Linearity ? ±0.02 % F.S. (minimum ±60 ?m)Repeatability ? ±0.005 % F.S. (minimum ±20 ?m)Operating conditionsOperating temperature ?40…+75 °C (?40…+167 °F)Humidity 90 % rel. humidity, no condensationIngress protection 1,2 IP67 (if mating connectors are correctly fitted)Shock test 100 g (single shock) IEC standard 60068-2-27Vibration test 5 g / 10…2000 Hz IEC standard 60068-2-6 (resonance frequencies excluded)EMC test Electromagnetic emission according to EN 61000-6-3Electromagnetic immunity according to EN 61000-6-2The sensor meets the requirements of the EC directives and is marked with .Magnet movement velocity ? 5 m/sDesign / MaterialSensor electronics housing AluminumGuided driving rod AluminumStroke length 50…1500 mm (2…60 in.)Mechanical mountingMounting position AnyMounting instruction Please consult the technical drawings and the brief instructions (document number: 551684)Electrical connectionConnection type M12 (5 pin) male connectorOperating voltage +24 VDC (?15 / +20 %); UL recognition requires an approved power supply with energylimitation (UL 61010-1), or Class 2 rating according to the National Electrical Code (USA) /Canadian Electrical Code.Ripple ? 0.28 VppCurrent consumption 50…140 mADielectric strength 500 VDC (DC ground to machine ground)Polarity protection Up to ?30 VDCOvervoltage protection Up to 36 VDC

Recommended Products For Mts Sensor