Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor

Mts Sensor

Product Code: MH SIL2
Brand: Mts Sensor



GET OFFER: info@imtek.com.tr

Description for Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor

OutputSignal characteristic Continuously analog output restricted by noise or A/D converter of control unitVoltage 0.5…4.5 VDC with failure signal < 0.5 VDC LO > 4.5 VDC HICurrent 4…20 mA with failure signal < 4.0 mA LO > 20 mA HIMeasured value PositionMeasurement parametersResolution Typ. 0.1 mmPower uptime Typ. 250 msLinearity 0050…0250 mm 0255…2000 mm 2005…2500 mm? ±0.1 mm ±0.04 % (F.S.) ? ±0.8 mmHysteresis ±0.1 mmInternal sample rate 1 msSetpoint tolerance ? 1 mmOperating conditionsOperating temperature electronics ?40…+100 °CStorage temperature ?20…+65 °CFluid temperature ?30…+85 °CHumidity EN 60068-2-30, 90 % rel. humidity, no condensationIngress protection – M12 connector EN 60529 – IP69K (correctly fitted)Ingress protection – Sensor housing EN 60529 – IP67Shock test IEC 60068-2-27, 100 g (6 ms) single shock, 50 g (11 ms) at 1000 shocks per axisVibration test IEC 60068-2-64, 20 g (r.m.s.) Ø 10 mm pressure pipe (10…2000 Hz) – resonance frequencies excludedEMC test UNECE Regulation 10 Rev 5: Electromagnetic CompatibilityISO 14982 Agricultural and forest machinesEN 13309 Construction machinesImmunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)Emissions: CISPR 25Transiente Impulses: ISO 7637-1/2E.S.D.: ISO/TR 10605The sensor meets the requirements of the EC directives and is marked withPressure (according to DIN EN ISO 19879)* Ø 10 mm pressure pipePN (nominal operating) 350 barPmax (max. overload) 450 barPstatic (proof pressure) 625 barDesign / MaterialSensor electronics housing Stainless steel 1.4305 (AISI 303)Sealing O-ring 40.87 × 3.53 mm NBR 80, back-up ring 42.6 × 48 × 1.4 PTFESensor rod Stainless steel 1.4306 (AISI 304L)M12 connector insert Material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pinsM12 flange Brass nickel-plated with O-ring 13 × 1.6 NBR 70Stroke length 50…2500 mmMechanical mountingMounting position AnyMounting instruction Please consult the technical drawingsElectrical installationConnector M12 male connectorSupply voltage 12 VDC (8…32 VDC) 24 VDC (16…32 VDC)Current consumption Typ. < 100 mA Typ. < 50 mALoad (output VDC) RL > 10 k? RL > 10 k?Load current (output VDC) Typ. 0.5 mA Typ. 0.5 mALoad (output mA) RL < 250 ? RL < 500 ?Inrush current Max. 2.5 A/2 ms Max. 4.5 A / 2 msSupply voltage ripple < 1 % PPPower drain < 1 WOver voltage protection (GND - VDC) Up to +36 VDCPolarity protection (GND - VDC) Up to ?36 VDCInsulation Resistance R ? 10 M? @ 60 secElectric strength 500 VDC (DC GND to chassis GND)*/ According to calculations under use of the FKM guidelineCycles Ø 10 mm sensor rodDynamic pressure: < 2 × 106 pressure cycles 350 barStatic pressure: < 2 × 104 pressure cycles 450 barProof pressure: Maximum 5 minutes testing time for cylinder pressure test 625 bar

Recommended Products For Mts Sensor