Toni Technik ToniPRAX Compression and Bend Test Plant

Toni Technik

Product Code: ToniPRAX
Brand: Toni Technik



GET OFFER: info@imtek.com.tr

Description for Toni Technik ToniPRAX Compression and Bend Test Plant

consisting of the following components: ToniTROL ,,Standard" Microprocessor controlled measuring and control system with 4 serial and one parallel interface and basic software for load controlled tests. Model 0510   ToniNORM Powerbox with all hydraulic components, power supply unit and servo valve for bypass control (closed loop). 400 V, 50/60 Hz, 3 phases Model 2010   Load Frame for Compression Tests with max. 300 kN EN 196, lSO 679, ASTM C 109, BS 4550-3 -  two-column design -  force measurement with DMS load cell load measurement range           3.0 ... 300 kN piston stroke                         60 mm pressure plate distance             65 mm distance between columns         210 mm Model 1543 Load Frame for Bending Strength Tests with max. 10 kN EN 196 / ASTM C 348-  two-column design-  force measurement with DMS load cell load measurement range 0.1... 10 kN piston stroke       30 mmsupport distance                    100 mmsupport width                        45 mm diameter of bending edges            10 mm Lichter Saulenabstand            155 mm Model 1544Combined test area protectionwith electrical lock and sefety circuitModel 1543.0300/10.85 A third load frame can be connected to the Powerbox if required, e.g. a 3000 kN load frame for compression tests of concrete specimens.Accessories: Set of pressure plates 40 x 40 mmModel 1543.011.1Set of pressure plates 50 x 50 mmModel 1543.013Set of pressure plates 79.4 x 74 mmModel 1543.009Set of pressure plates 70.7 x 70.7 mmModel 1543.010.1Adapter Flangefor testing prisms 40x40x160 mm in a vertical position,e.g.   for the determination of the Modulus of ElasticicityModel 1543.014Adapter Flangefor testing specimens up to 100 mm heightModel 1543.015Centering Device for Specimensto center the specimen on the lower pressure plateModel 1543.023Manually Operated Bending Deviceto break the prisms 40x40x160mm into halvesModel 1543.020  Further pressure plates and accessories are available on request.

Recommended Products For Toni Technik