Technical Data:
Technical Data - Switching element:
Technical Data - Thermostat:
For liquids level detection in reservoirs and
agent temperature monitoring.
In the conductor piece there are 3 switching
elements at maximum which are latched
into a hole strip at hole distances of 10mm
each. The switching function is bistable.
When turning the contacts by 180°, the
switching function can be reversed (opening contact becomes closing contact and
vice versa).
The switching elements can be subsequently changed in their switching functions
and replaced by loosening the cap screws.
Upon reaching the firmly set response
temperature, a bimetal disk that can be
influenced by the temperature will switch
(see Order designation). The thermostat ist
situated in the lower part of the conductor
piece and can be exchanged.
For inductive an capacitive loads,
suppressor circuits shall be provided for.
(Diode, RC element, varistor)
Level Switch - Function:
Thermostat - Function:
Operating pressure max.: 8 bar
Temperature range: 0...80 °C
Mounting position: vertically ± 20°
Material:
tube, flange, float: 1.4571
Protection type: IP 65
Plug-in connection: DIN 43651
Weight at L=300: 0,65 kg
Weight/ 100mm excess lenght: 0,05 kg
Switching voltage: 10...250 VUC
Switching current max.: 0,5A
Switching capacity max.: 40/60 W/VA
Switching voltage: 10...250 VUC
Switching current max.: 6,3A(Cos 0,6)
Response tolerance: ±6%
Hysteresis at max.: 18°C