im-tek.com

Zpa Pecky MO EEx Electric Actuator

Zpa Pecky

Product Code: MO EEx
Brand: Zpa Pecky



GET OFFER: info@imtek.com.tr

Description for Zpa Pecky MO EEx Electric Actuator

The MODACT® MO EEx electric rotary multi-turn actuators are specially intended for controlling devices by a reversing rotary motion, e.g. slide valves and valves, and, in connection with an appropriate gearbox, also flap or ball valves, and other devices for which they are suitable due to their properties.They can be operated in an environment with a danger of explosion of explosive gaseous atmosphere in zone 1 and zone 2 according to EN 60079-10 (332320). The actuators are designed as a device of group II, category 2G in compliance with standards EN 60079-0:2004, EN 60079-1:2004, and EN 60079-7:2004 for explosive gaseous atmosphere.The actuators are marked with a label of protection against explosion and symbols of the group and category of the device Ex II 2G or Ex I M2; in addition, according to version for surrounding temperature -25°C to + 55°C with marking Ex de IIC T4 or for surrounding temperature -50°C to +55°C with marking Ex de IIB T4, and/or as modification for using in mines of group I, category M2 with marking Ex de I (see chapter Data on actuators).Technical dataMO EExType number521205212152122521235212452125 20-12563-160160-250250-500320-630630-1100Tripping force [kN]      Adjusting time [s/90°]      Position-changing velocity[min-1]11-4016-12510-8016-10016-6330-100[mm/min]      Working stroke[°]      [ot]2-250 (2-620)2-250 (2-620)2-250 (2-620)2-240 (2-470)2-240 (2-470)2-240 (2-470)[mm]      Supply voltage1x 230 V, 50 Hz      24 V, 50 Hz      1 x 110 V, 50 Hz      3 x 230 / 400 V, 50 Hz??????ControlTwo position On-Off??????Three position      Continuous      PROFIBUS      Position sensingResistance transmitter (R)??????Absolute??????Current transmitter (I)??????Position interrupt??????Torque-initated interrupt??????Manual actuation??????Explosion-proof design??????Type of enclosureIP 55IP 55IP 55IP 55IP 55IP 55Weight - depending on design (Al/cast iron) and on motor [kg]47-4957-8057-80112-150108-150239-248UsageDesignation of explosion-proof propertiesIt consists of the following symbols:EEx - Electric device complies with the standard EN 50 014 and related standards for various types of protection against explosion.d - Designation of the type of protection against explosion, explosion-proof closure according to EN 50 018.II - Designation of the group of explosion-proof electric device according to ?SN EN 50 014.C - Designation of the sub-group of the group of explosion-proof electric device according to EN 50 014.T4 - Designation of temperature class of explosion-proof electric device of the Group II according to EN 50 014.NomenclatureEnvironment with explosion danger - environment in which an explosive atmosphere can be createdExplosive gaseous atmosphere - a mixture of flammable substances (in the form of gases, vapours or mist) with air under atmospheric conditions in which, after initialization, burning spreads out to non-consumed mixture.Maximum surface temperature - The highest temperature created during operation under the most unfavourable conditions (however within approved limits) on any surface part of the electric device, which could induce ignition of surrounding atmosphere.Closure - All walls, doors, covers, cable bushings, shafts, rods, pull-rods, etc. which contribute to the type of protection against explosion and/or to the level of protection (IP) of the electric device.Explosion-proof closure “d” - Type of protection in which the parts capable of causing ignition of an explosive atmosphere are installed inside the closure; in case of internal explosion this closure should withstand pressure of the explosion and prevent spreading of the explosion into the surrounding atmosphere.Secured design “e” - Type of protection against explosion with additional measures adopted for increased safety against non-permissible temperature increase and formation of sparks or arcs inside and on external parts of the electric device which, under normal operating conditions, does not form sparks or arcs.

Recommended Products For Zpa Pecky


Zpa Pecky MON Series Electric Actuator
Zpa Pecky KP MINI Electric Actuator
Zpa Pecky MONJ Series Electric Actuator
Zpa Pecky MOA Electric Actuator
Zpa Pecky MTNED Series Electric Actuator
Zpa Pecky MTP Series Electric Actuator
Zpa Pecky MOKP Ex Sries Electric Actuator
Zpa Pecky MOK Series Actuator
Zpa Pecky MTN Series Electric Actuator
Zpa Pecky MOKPED Ex Series Electric Actuator
Zpa Pecky KP MIDI Electric Actuator
Zpa Pecky MPR Series Electric Actuator
Zpa Pecky MOED EEx Electric Actuator
Zpa Pecky MTPED Series Electric Actuator
Zpa Pecky MTP Series Electric Actuator
Zpa Pecky 52326.806F4 Actuator
Zpa Pecky MOPED Series Electric Actuator
Zpa Pecky MPS Series Electric Actuator
Samson 0520-1149 Diaphragm
Servomech SJ 400 BS Mod B Ball Screw Jack
Grundfos DMX 17-4 B-PVC/V/C-X-E1U3U3XEMNG Dosing Pump
Aerzen 170837000 Filter
Felm FA3-90L-6 Motor
Hengstler AC58/0009ES.41PGA Absolute Encoder
KOYO 7302DB Angular contact ball bearings
Roemheld 1460001 S035611 Screw-in Cylinder
JVM JDA 20G-60 Dosing Drive
Asco 53800002 (air Operated / Air Operated Return)
Grundfos NK 150-315/337 AA1F1AESBAQEQW5 Pump
American Industrial AA-1660-TP Heat Exchanger
Vogel MKF2-12DC10000 428 Single Line Pump
Knf NMP03KPDC-M Micro Diaphragm Gas Pump
Control Techniques KI KEYPAD Unıdrıve M
SKF NU 207 ECP Bearing
FIP Italy FKOM/FM Series DN 40÷400 Butterfly Valve
Skf SY508M Plummer Block Housing
Fisher ACE95Jr Tank Blanketing Valv
American Industrial UCS-636 Heat Exchanger
Scherzinger 4030-450-B-DM-55-2-Exd Stainless Steel Gear Pumps 4030
Eaton 01.N100.10VG.16.E.P Hydraulic Oil Filter Element
Felm FAA3-400F5-08P Motor
Stenflex Type B-1 DN 32 Expansion Joint