im-tek.com

Apv SD4 Valve

Apv

Product Code: SD4
Brand: Apv



GET OFFER: info@imtek.com.tr

Description for Apv SD4 Valve

Safe Separation of Incompatible MediaWith two serial seat seals and a separation cavity, the DELTA SD4 valves are designed for safe media separation.Excellent Hygienic FeaturesDELTA SD4 valves have excellent hygienic characteristics due to a number of design features: Ball-shaped housing without sump or dome Crevice-free sealing Leakage discharge valves enabling drainage as well as cleaning of neutral cavityCIP/SIP Cleaning of Leakage CavityThe DELTA SD4 valves have leakage discharge valves to drain the neutral area between the seals. The leakage discharge valves are used for supply and discharge of cleaning media, which enables CIP and SIP cleaning of the neutral area. Leakage valves and actuator are controlled by the same solenoid valve. Therefore, additional control is not required.Multiple Designs Available, Incl. AsepticDELTA SD4 valves are available in a shut-off, a change-over and a tankoutlet design. Furthermore, the valves are available in an aseptic design with a supported flat TFM membrane.Long Seal LifeSealings designed with metallic stop ensure limited elastomer compression and, consequently, avoidance of sealing overstress. Moulded elastomer profile seals with clear identification markings ensure prompt and fail-safe identification of seals during maintenanceMaintenance-friendlyOnly one hexagonal nut outside the product area ensures quick and easy service of the valve. Flanged valve body closure for safe and controlled disassembly and assembly of valve insert.Theory of OperationThe DELTA SD4 valves are used for safe separation of incompatible media. Safe media separation is provided by a design with two seat seals. A ring-shaped leakage chamber is arranged between the two seals. It is forcible closed or opened to the atmosphere by the two leakage discharge valves.In case of damage of the seat seals, the leakage will be drained via the leakage valves to the atmosphere and indicated.Cleaning of the leakage chamber is undertaken via the leakage valves. The cleaning liquid is supplied via one leakage valve and discharged to the atmosphere via the second one. The directed flow of the cleaning liquid provides for a perfect cleaning of the whole leakage chamber.

Recommended Products For Apv


Apv SI2 Safety Valve
Apv VPN Check Valve
Apv CU4 DELTA CONTROL UNIT
Apv Gaulin 15 / 24 / 37 High Pressure Homogenizers
Apv 132Q Gaulin High Pressure Homogenizers
Apv 185Q GAULIN High Pressure Homogenizers
Apv SD4 Valve
Apv Whp+ High Pressure Centrigual Pump
Apv SSU Unit System
Apv KCC Standardization System
Apv AR2-1 Plate Heat Exchangers
Apv SW4 Single Seat Valve
Apv DELTA SWcip41 housing variant
Apv PHE R5 Quad Drive Quad-Drive
Apv GW120 Pump Mechanical Seal
Apv CSD Blending System
Apv W+35/55 5,5KW 140 IMPELLER Centrifugal Pump
Apv M08EA20P5M15A Elite and Alta Model
Indexator 5002374 Link 75-80/25
Skf HMSA10 RG 17x30x7 mm Oil Seal
Jaquet ISTSSYT10-A00-XXX Speed Monitor & Switch
Brinkmann TVA900 Stainless Steel Immersion Pump
Wilkerson R04-02-L00 Miniature Regulator
Bucher Hydraulics 5207200303 Solenoid Valve Coil
Vogel MKU1-11BA00000 428 Single Line Pump
Aoip CALYS 80 IS ATEX Documenting Multifunction Calibrator
NSD GPS-2824M-0.5 Sensor (gauge)
Westcode N2055MC260 Phase Control Thyristors-Capsule
BUCHER QX33-016R117 Single Pump
Mp Filter HP1352A25AHP01 Filter
Vogel MKU2-14EC11000 429 Single Line Pump
Metalwork 6169000U V3V 400 1 PNEUMATIC
Goldammer M20-T-L200-T1-VA-2M12-TF70Ö-4-20mA Indicator
Atlas Copco 1900520042 Elektronikon Mk5 I/ O34
Adler FM2 DN15 HEATING JACKET VALVES
Alfa Laval 9612628661 LKB F DN80 DIN W/W EPDM 304L KIT ACT LKLA-T Ø85 NC 6MM
Meister DKM/A-1/2 G1 Flowmeter
ESN Type 853299 Test Unit
Vulcanic 3216-06 Screw Plug Immersion Heater
Rhomberg AT110 Timer - Interval - Hold or Pulse Reset via ext signal
Vulcanic 2389-57 Flange Immersion Heater
Martens 7024 Build-in Probe