Product Name: Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Brand: Gestra
Product Code: UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Tags: Gestra
Gestra UNA DN25 PN40 EN PN40 DUPLEX
DN25 PN40 FLANSCH PN40 DUPLEX
Gestra 45V DN25 PN40 PN40
Gestra UNA 45V PN40 DUPLEX
Gestra 45V PN40 PN40
Gestra 45V PN40 DUPLEX
Gestra PN40
Gestra DN25 PN40 FLANSCH DUPLEX
45V DN25 PN40 FLANSCH PN40 DUPLEX
UNA 45V FLANSCH EN PN40
Gestra DN25 PN40 EN DUPLEX
Gestra PN40 FLANSCH EN PN40 DUPLEX
Gestra UNA 45V PN40 EN PN40
UNA DN25 EN PN40 DUPLEX
DN25 DUPLEX
UNA PN40 DUPLEX
Gestra UNA PN40 PN40 DUPLEX
Gestra DN25 PN40 FLANSCH PN40 DUPLEX
45V DN25 PN40 PN40
UNA PN40 EN
Ball Float Steam Trap UNA 45
您对制造商Gestra的产品Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX，代码为UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX感兴趣吗？立即联系我们获取报价。Imtek Engineering，世界上最快最可靠的工业设备供应商，将为您提供最佳报价！
Get Offer With E-Mail: info@im-tek.com
Get a offer for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX from our live support team now!
Description Float traps type UNA 45 are designed for removing condensate from steam or compressed air. Float traps type UNA 46 and UNA 46A are designed for removing condensate from steam or other gases / gas mixtures. Equipment fitted with control unit SIMPLEX and SIMPLEX-P is operated and controlled by the float and the rolling ball. Equipment with this type of control unit is particularly suitable for cold condensate and cold distillates. The rolling ball of the control unit SIMPLEX-P is made of Perbunan® rubber, which ensures tight shut-off of the seat. Equipment with control unit DUPLEX may also be used for air venting the installation. This type of control unit is particularly suitable for saturated steam systems. The control unit DUPLEX consists of a float operated rolling ball valve and a temperature dependent air-venting facility. Do not expose the membrane regulator capsule of the DUPLEX control unit to superheat conditions above 5 K. By means of the externally adjustable internal bypass it is possible to adjust a bypass passage that flows past the control unit. The equipment must only be used within the allowable pressure and temperature limits and only if the chemical and corrosive influences on the equipment are taken into account.