Armatury S43.1 acc. To ASME Gate Valve

Produktname: Armatury S43.1 acc. To ASME Gate Valve
Marke: Armatury
Produktcode: S43.1 acc. To ASME
Stichwörter: Armatury S43.1 To ASME Gate Valve acc. To ASME Gate Valve Armatury S43.1 acc. S43.1 acc. To Gate Armatury acc. To ASME Gate Valve To ASME Valve acc. Gate S43.1 To ASME Gate Armatury acc. Gate acc. To ASME Gate To Valve Armatury To Gate Valve S43.1 Gate Valve S43.1 To ASME S43.1 acc. Valve S43.1 To ASME Gate Valve ASME Gate Armatury S43.1 To ASME Valve
Gate Valve

Interessieren Sie sich für das Produkt Armatury S43.1 acc. To ASME Gate Valve vom Hersteller Armatury mit dem Code S43.1 acc. To ASME? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!

Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Armatury S43.1 acc. To ASME Gate Valve von unserem Live-Support-Team!

PRODUKTDETAILS

Application Gate valves are isolating valves designed for full closing or opening of working media flow. If the gate valves are used for regulating or throttling purposes, the manufacturer does not guarantee tightness of the gate valves. For regulation we recommend to use special control gate valve type S33.C. Working medium water non-corrosive liquids steam air gases of group 1 and 2 petroleum and petroleum products The service fluids shall not contain rough impurities. Technical description The gate valve is an outside-screw-and-yoke, full bore with flexible wedge and rising stem. The body and the bonnet are made of castings and are connected by a flanged joint. The seating surfaces of the seats and the wedge are made in compliance with API 600. The seat rings are welded into the body. The gate valves are equipped with a back seat. The gate valves are a bi-directional sealing valves. The body-bonnet joint and the packing chamber are sealed with asbestos-free gasket and packing which guarantee a long life service. The requirement for an automatic body cavity pressure relief shall be specified in the purchase order. Pressure relief can be achieved by: drilling a hole through one disc of the wedge, special valve incorporated into the wedge, external bypass, use of solid wedge. TA-Luft design on request.