ESN Type 8434 Electronic Thermostat

In view of the option to specify the trigger value and the reset value in steps of 1°C within a wide measuring range (this must be specified explicitly when ordering), these thermostats (temperature sensors) or the 8434 series are especially suitable for applications that place high requirements concerning switching accuracy and reproducibility. Technical data Dimensions Ø 27 mm, L approx. 155 mm; see   figure Housing Stainless steel / PA; protection type:   IP 67 El. connection Quick-connection system Wire cross-section 1 to 1.5 mm2 (strands Ø 0.2 mm) Wire insulation PVC or PE is permissible Wire external diameter   Two-core cable sensor permitted 5.6 - 8.0 mm (PG 11) Three-core cable sensor permitted 5.6 - 8.5 mm (PG 13.5) Ambient temperature -30°C to +80°C Switching point tem- -30°C to +80°C perature   Hysteresis 1°C Note The switching point tempera-   ture and the hysteresis can be   programmed in steps of 1°C   (please specify when ordering) Measuring error max.: ±0.5°C Function: Two-core cable sensor   I = 20 mA if ? ? switching point temperature   I ? 2 mA if ?   ? switching point temp. – hysteresis   ? 8434 0-   I ? 2 mA if ?   ? switching point temperature   I = 20 mA if ?   ? switching point temp. – hysteresis   ? 8434 1- Three-core cable sensor Output = H if ? ? switching point temperature   Output = L if ?   ? switching point temp. – hysteresis   ? 8434 0-   Output = L if ?   ? switching point temperature   Output = H if ?   ? switching point temp. – hysteresis   ? 8434 1- Two-core cable sensor Supply voltage: 8 - 12 V DC ? 8434 02 (e.g.: Type 8582) ? 8434 12 Quiescent current: 2 mA   Signal current: 20 mA ±2 mA   (smaller values on request) Three-core cable sensor Supply voltage: 24 V DC (±20 %), ? 8434 03 quiescent current: < 7 mA ? 8434 13 Output: positive-switching   Voltage: H: Supply voltage - 1 V;   L: 0.5 V (RL = 10 k)   Current: 100 mA, resistant to short   circuits and overloads; Ik max. 1.5 Accessories: