Aoip THERMYS 150 Thermometer / Temperature Calibrator

Êtes-vous intéressé par le produit Aoip THERMYS 150 Thermometer / Temperature Calibrator du fabricant Aoip avec le code THERMYS 150? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!

Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Aoip THERMYS 150 Thermometer / Temperature Calibrator de notre équipe de support en direct maintenant!

DÉTAILS DU PRODUIT

THERMYS 150 is an all-in-one high accurate documenting thermometer / temperature calibrator for thermocouples (14 types), resistive probes (12 types) and thermistors with a high accuracy:Thermocouples: Up to 0.005% RDGRTDs: Up to 0.006% RDGThermistors: Up to 0.006% RDGIt is designed for field and lab use for advanced temperature maintenance and use on test bench in all industries.Simultaneous measurement and emission of temperature (IN / OUT)Simultaneous measurement over two channels for comparison calibration (IN / IN)The second channel can be used either for temperature generation or measurement. When used as a dual input thermometer, THERMYS 150 is the perfect tool for temperature comparison calibration and differential measurement. When the second channel is used as an output, the instrument can be used to control temperature recorders, indicators, handheld thermometers.Using this user-friendly instrument, calibration tasks can be quickly carried out over the whole process chain. Take the 900 g documenting process calibrator to the field with you during the whole week with 10 calibration procedures stored in the device. Run the procedure after connecting the probes to the instrument (Easy connect system®) and save the results for onsite easy and quick calibration. Back to the office, you can then upload the data on a computer in order to issue customized calibration certificates with dedicated calibration software DATACAL.Providing extended functionalities (temperature simulation, scaling, steps, synthesizer, statistical functions…) and audit trails, THERMYS 150 complies with both 21 CFR Part 11 and NADCAP Heat Treatment standards and makes advanced data exploitation and full data traceability easier.IP 54, fully protected by an antichoc rubber holster, THERMYS 150 integrates "easyconnect" terminals and a wide backlite display that makes it easy to use in any severe or dark conditions.THERMYS 150 has also the capability to drive baths and dry-blocks when associated with the specific cable (ref. ACL600).Easy connection systemConnect Connect your probes by simply pushing on the terminal top and insert wires of up to 3 mm or 10 AWG diameter and compensated thermocouple connectors.Wires are held tight between two brass plates ensuring thermal stability and a very good cold junction compensation for thermocouples.This system also enables 4 mm banana plugs and security connectors to be connected on the terminal top.