Nom du Produit: Barksdale Lockout Device for Heavy Duty Valves
Marque: Barksdale
Code Produit:
Mots-clés: Barksdale
for Heavy Duty
Device Heavy
Heavy Duty
Lockout Heavy Duty
Device
Barksdale Lockout for Duty
Barksdale Lockout Device for Duty
Barksdale Device for Duty Valves
Lockout Device for Duty Valves
Barksdale Lockout for
Lockout Duty
Lockout Device Heavy Valves
Barksdale Lockout
Lockout for Heavy Duty
Lockout
Lockout for
for Heavy
Device Duty Valves
Lockout for Heavy Valves
Barksdale Lockout Device Duty Valves
Lockout Device for Heavy Duty Valves
Êtes-vous intéressé par le produit Barksdale Lockout Device for Heavy Duty Valves du fabricant Barksdale avec le code ? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Barksdale Lockout Device for Heavy Duty Valves de notre équipe de support en direct maintenant!
Valve Lockout Device is used on oil and gas applications to mechanically stop the handle from rotating to ensure that the valve remains inoperable while technicians carry out maintenance work. The Valve Lockout Device is attached to the operational part of Barksdale's heavy duty valve to prevent the valve from changing position. Valve lockouts help prevent potentially harmful accidents during maintenance or repairs and allow workers to close off or isolate energy sources such as hydraulic pressure and fluids. This specific lockout device is designed for use on Barksdale's heavy duty valves 1/2" valves or 1" oil & gas valves to stop any rotation of the handle.This lockout device meets the scope of OSHA 1910.147, subpart O.General Specifications*Material:Zinc plated carbon steelWeight:1/2” Port size1” Port size0.7 lbs (0.34 kg)1.6 lbs (0.72 kg)Installation Instruction:- Remove the two bolts and nuts on the side where the detent holes are.- Install the bracket on the housing.- Retighten the bolts and nuts with torque wrench to: • 180 in3/lbs for 1/2” • 480 in3/lbs for 1”- Remove all the components on top of the valve to the detent disc.- Discard the detent disc. Install the new detent disc.- Re-install all components on top of the valve.- Tighten the handle nut finger tight then wrench it a half turn.* See product configurator for additional options.