EKF C20-SATA Dual-Drive Mezzanine Module

Êtes-vous intéressé par le produit EKF C20-SATA Dual-Drive Mezzanine Module du fabricant EKF avec le code EKF C20-SATA Dual-Drive Mezzanine Module? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!

Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour EKF C20-SATA Dual-Drive Mezzanine Module de notre équipe de support en direct maintenant!

DÉTAILS DU PRODUIT

Available as a mezzanine add-on storage module to several CPCI side boards, the purpose of the C20-SATA is to accommodate one or two 2.5-inch SATA drive(s), either SSD (Solid State Drive) or HDD (Hard Disk Drive). With respect to the dual drive solution, either RAID or non-RAID drivers are available. Since only a few components are required on the C20-SATA PCB, it is a moderate cost system storage solution. The C20-SATA mounts on top of the carrier board. Provided with a single (top mount) drive, the 4HP profile of the associated carrier board would be maintained, resulting in a 8HP total assembly, comprised of the CompactPCI® base board, the expansion carrier card (aka side board), and the C20-SATA storage module.As an option, the C20-SATA can be populated with another (bottom mount) drive, resulting in a 10HP or 12HP assembly stack. The two SATA channels are derived from a carrier board SATA controller (JMB362 as of current), for RAID 0/1/10 operation, or normal usage. Solid state drives (SSD aka Flash Drive) are recommended for fast and rugged operation. Single level cell (SLC) drives offer the highest transfer speed and superior reliability. A hard drive should be considered as an economic solution, with decreased operating temperature and performance compared to a SSD, but maximum storage capacity as of current.