EKF C20-SATA Dual-Drive Mezzanine Module

Interessieren Sie sich für das Produkt EKF C20-SATA Dual-Drive Mezzanine Module vom Hersteller EKF mit dem Code EKF C20-SATA Dual-Drive Mezzanine Module? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!

Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für EKF C20-SATA Dual-Drive Mezzanine Module von unserem Live-Support-Team!

PRODUKTDETAILS

Available as a mezzanine add-on storage module to several CPCI side boards, the purpose of the C20-SATA is to accommodate one or two 2.5-inch SATA drive(s), either SSD (Solid State Drive) or HDD (Hard Disk Drive). With respect to the dual drive solution, either RAID or non-RAID drivers are available. Since only a few components are required on the C20-SATA PCB, it is a moderate cost system storage solution. The C20-SATA mounts on top of the carrier board. Provided with a single (top mount) drive, the 4HP profile of the associated carrier board would be maintained, resulting in a 8HP total assembly, comprised of the CompactPCI® base board, the expansion carrier card (aka side board), and the C20-SATA storage module.As an option, the C20-SATA can be populated with another (bottom mount) drive, resulting in a 10HP or 12HP assembly stack. The two SATA channels are derived from a carrier board SATA controller (JMB362 as of current), for RAID 0/1/10 operation, or normal usage. Solid state drives (SSD aka Flash Drive) are recommended for fast and rugged operation. Single level cell (SLC) drives offer the highest transfer speed and superior reliability. A hard drive should be considered as an economic solution, with decreased operating temperature and performance compared to a SSD, but maximum storage capacity as of current.