Nom du Produit: Fisher 4194 Differential Pressure Indicating Controllers
Marque: Fisher
Code Produit: 4194
Mots-clés: Fisher
Fisher Indicating Controllers
Fisher 4194 Differential
4194 Differential Pressure Indicating
Fisher Indicating
Fisher 4194 Pressure Indicating
Pressure Indicating Controllers
Fisher Pressure Indicating Controllers
4194 Pressure Indicating Controllers
Controllers
Fisher Pressure Indicating
Pressure Indicating
Fisher Differential Indicating Controllers
Fisher 4194 Pressure Indicating Controllers
4194 Pressure Indicating
4194 Pressure Indicating Controllers
Fisher Differential Pressure Controllers
4194 Differential Indicating
Fisher 4194 Pressure Controllers
Fisher Pressure
Pressure Controllers
Differential Pressure Indicating Controllers
Êtes-vous intéressé par le produit Fisher 4194 Differential Pressure Indicating Controllers du fabricant Fisher avec le code 4194? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Fisher 4194 Differential Pressure Indicating Controllers de notre équipe de support en direct maintenant!
Fisher 4194 differential pressure indicating controllers show process differential pressure and set point on an easy-to-read process scale.The controllers sense two different pressures and compare the difference between these pressures with an operator-adjusted set point. They are available for proportional only, proportional-plus-reset, and differential gap control. The controller is also available with anti-reset windup, internal auto/manual station, and remote set point adjustability. 4194 controllers are used in industries where process monitoring and accurate measurement of differential pressures are required.FeaturesSimple design of the controller allows fast, easy maintenance and minimal spare parts inventory.Adjusting the set point and the zero and span of the process pointer and switching between direct and reverse action are accomplished quickly and without special tools.Simple design and low mass of internal parts allow the controller to withstand vibration encountered in most plant environments.Relay and nozzle design reduces steady-state air consumption to as low as 0.09 normal m3/hr (5 scfh).Tough plastic housing resists corrosive environments. Internal constructions are available to resist a corrosive supply pressure media.The controller can mount directly on the actuator or it can mount on a pipestand, on a wall, or in a panel.Two red pointers on a 114 mm (4 1/2 in) long white-on-black scale show differential pressure and deviation from set point at a glance. Two other gauges monitor supply and output pressures.