Produktname: Fisher 4194 Differential Pressure Indicating Controllers
Marke: Fisher
Produktcode: 4194
Stichwörter: Fisher
4194 Pressure Controllers
Fisher Differential Controllers
Controllers
Fisher 4194 Controllers
Fisher 4194 Differential Pressure Indicating Controllers
4194 Differential Controllers
Fisher 4194 Pressure Indicating
Differential Pressure
Fisher 4194 Pressure
Indicating Controllers
4194 Pressure
Fisher 4194 Pressure Indicating
Fisher 4194 Differential Controllers
Fisher 4194 Differential Pressure Indicating
Fisher Pressure Indicating Controllers
Pressure Indicating
Fisher Differential Pressure Indicating Controllers
Fisher Differential Indicating
Fisher 4194 Differential
Differential Pressure Indicating Controllers
Interessieren Sie sich für das Produkt Fisher 4194 Differential Pressure Indicating Controllers vom Hersteller Fisher mit dem Code 4194? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Fisher 4194 Differential Pressure Indicating Controllers von unserem Live-Support-Team!
Fisher 4194 differential pressure indicating controllers show process differential pressure and set point on an easy-to-read process scale.The controllers sense two different pressures and compare the difference between these pressures with an operator-adjusted set point. They are available for proportional only, proportional-plus-reset, and differential gap control. The controller is also available with anti-reset windup, internal auto/manual station, and remote set point adjustability. 4194 controllers are used in industries where process monitoring and accurate measurement of differential pressures are required.FeaturesSimple design of the controller allows fast, easy maintenance and minimal spare parts inventory.Adjusting the set point and the zero and span of the process pointer and switching between direct and reverse action are accomplished quickly and without special tools.Simple design and low mass of internal parts allow the controller to withstand vibration encountered in most plant environments.Relay and nozzle design reduces steady-state air consumption to as low as 0.09 normal m3/hr (5 scfh).Tough plastic housing resists corrosive environments. Internal constructions are available to resist a corrosive supply pressure media.The controller can mount directly on the actuator or it can mount on a pipestand, on a wall, or in a panel.Two red pointers on a 114 mm (4 1/2 in) long white-on-black scale show differential pressure and deviation from set point at a glance. Two other gauges monitor supply and output pressures.