Nom du Produit: Mts Sensor MH200 Mobile Hydraulic Position Sensor
Marque: Mts Sensor
Code Produit: MH200
Mots-clés: Mts Sensor
MH200 Hydraulic Position
Mts Hydraulic Position Sensor
Sensor MH200
Sensor Mobile Hydraulic Position
Sensor MH200 Mobile Hydraulic Position
Mts MH200 Mobile Sensor
Mts Mobile Position Sensor
Mts MH200 Hydraulic Sensor
Mts Mobile Hydraulic Position Sensor
MH200 Position
Sensor
Mts Sensor MH200 Mobile Sensor
Mts Sensor MH200 Mobile Hydraulic
Mts Sensor MH200 Mobile Position
Sensor Position
Sensor MH200 Mobile Sensor
Mts Hydraulic
Sensor MH200 Mobile Position Sensor
Mobile Hydraulic
Mts Hydraulic Sensor
Mobile Hydraulic Position Sensor
Êtes-vous intéressé par le produit Mts Sensor MH200 Mobile Hydraulic Position Sensor du fabricant Mts Sensor avec le code MH200? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Mts Sensor MH200 Mobile Hydraulic Position Sensor de notre équipe de support en direct maintenant!
Measured value positionStroke range 2520…5000 mm (in 20 mm steps)OutputSignal characteristic analog output restricted by noise or A/D converter of control unitVoltage 0.5…9.5 VDCCurrent 4…20 mAResolution 2520…3500 mm ? 0.5 mm 3520…5000 mm ? 1.0 mmPower up time typ. 250 msMounting zone 30 mmDamping 63.5 mm69.5 mm (M6 female) / 85.5 mm (M8 male)AccuracyLinearity 2520…3500 mm ? ±1.0 mm3520…5000 mm ? ±2.0 mmHysteresis 2520…3500 mm ? ±0.5 mm3520…5000 mm ? ±1.0 mmInternal sample rate 2 msSetpoint tolerance ?1 mmOperating conditionsMounting position anyOperating temperature electronics ?40…+105 °CStorage temperature ?25…+ 65 °CFluid temperature ?30…+ 85 °CDew point, humidity EN60068-2-30, 90 % rel. humidity, no condensationPressure without considering support tube assemblyOperating pressure ratings pressure impulse test according DIN EN ISO 19879 (Ø 10 mm pressure pipe)PN 320 barPmax 400 barPstatic 550 barIP ratingM12 connector EN60529 (IP69K) when pluggedSensor housing EN60529 (IP67)Environmental testingShock test IEC 60068-2-27, 50 g (11 ms) single shock, 15 g (11 ms) at 1000 shocks per axisVibration test IEC 60068-2-64, 5 g (r.m.s.) Ø 10 mm pressure pipe (10…2000 Hz) - resonance frequencies excludedEMC test ISO 14982 Agricultural and forest machinesImmunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)Emissions: CISPR 25Transiente Impulses: ISO 7637-1/2E.S.D.: ISO/TR 10605Materials and dimensionsPressure pipe (Ø 10 mm) stainless steel 1.4306 / AISI 304LHousing stainless steel 1.4305 / AISI 303Sealing O-ring 40.87 × 3.53 mm NBR 80, back-up ring 42.6 × 48 × 1.4 PTFESupport tube stainless steel 1.4301 / AISI 304Support tube adapter (head/tail) stainless steel 1.4305 / AISI 303M12 connector insert material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pinsM12 flange brass nickel-plated with O-ring 13 × 1.6 NBR 70Electrical installationConnector M12 male plugSupply voltage 12 VDC (tolerance range 8…32 VDC) 24 VDC (tolerance range 8…32 VDC)Current consumption typ. < 100 mA typ. < 50 mALoad (output VDC) RL> 10 k? RL> 10 k?Load current (output VDC) typ. 1 mA typ. 1 mALoud (output mA) RL < 250 ? RL < 500 ?Inrush current max. 2.5 A/2 ms max. 4.5 A/2 msSupply voltage ripple < 1 % p-pPower drain < 1 WOver voltage protection (GND-VDC) up to +36 VDCPolarity protection (GND-VDC) up to ?36 VDCInsulation Resistance R ? 10 M? @ 60 secElectric strength 500 VDC (DC GND to chassis GND)