Produktname: Mts Sensor MH200 Mobile Hydraulic Position Sensor
Marke: Mts Sensor
Produktcode: MH200
Stichwörter: Mts Sensor
Mts MH200 Hydraulic Position Sensor
Mts Sensor MH200 Sensor
Sensor Position
Mts Sensor Position
Mts MH200 Mobile Hydraulic Position
Mts MH200
Sensor MH200 Position
Mts Sensor MH200 Mobile Hydraulic Sensor
Mts MH200 Hydraulic
Sensor Mobile Position
Sensor Mobile Hydraulic
Mobile Sensor
Mts Hydraulic Position Sensor
Sensor Mobile Hydraulic Sensor
Mts Mobile Hydraulic Sensor
Sensor MH200 Hydraulic Position Sensor
Mts MH200 Position Sensor
Mts Sensor Mobile Sensor
Mts MH200 Mobile Position Sensor
Mobile Hydraulic Position Sensor
Interessieren Sie sich für das Produkt Mts Sensor MH200 Mobile Hydraulic Position Sensor vom Hersteller Mts Sensor mit dem Code MH200? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Mts Sensor MH200 Mobile Hydraulic Position Sensor von unserem Live-Support-Team!
Measured value positionStroke range 2520…5000 mm (in 20 mm steps)OutputSignal characteristic analog output restricted by noise or A/D converter of control unitVoltage 0.5…9.5 VDCCurrent 4…20 mAResolution 2520…3500 mm ? 0.5 mm 3520…5000 mm ? 1.0 mmPower up time typ. 250 msMounting zone 30 mmDamping 63.5 mm69.5 mm (M6 female) / 85.5 mm (M8 male)AccuracyLinearity 2520…3500 mm ? ±1.0 mm3520…5000 mm ? ±2.0 mmHysteresis 2520…3500 mm ? ±0.5 mm3520…5000 mm ? ±1.0 mmInternal sample rate 2 msSetpoint tolerance ?1 mmOperating conditionsMounting position anyOperating temperature electronics ?40…+105 °CStorage temperature ?25…+ 65 °CFluid temperature ?30…+ 85 °CDew point, humidity EN60068-2-30, 90 % rel. humidity, no condensationPressure without considering support tube assemblyOperating pressure ratings pressure impulse test according DIN EN ISO 19879 (Ø 10 mm pressure pipe)PN 320 barPmax 400 barPstatic 550 barIP ratingM12 connector EN60529 (IP69K) when pluggedSensor housing EN60529 (IP67)Environmental testingShock test IEC 60068-2-27, 50 g (11 ms) single shock, 15 g (11 ms) at 1000 shocks per axisVibration test IEC 60068-2-64, 5 g (r.m.s.) Ø 10 mm pressure pipe (10…2000 Hz) - resonance frequencies excludedEMC test ISO 14982 Agricultural and forest machinesImmunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)Emissions: CISPR 25Transiente Impulses: ISO 7637-1/2E.S.D.: ISO/TR 10605Materials and dimensionsPressure pipe (Ø 10 mm) stainless steel 1.4306 / AISI 304LHousing stainless steel 1.4305 / AISI 303Sealing O-ring 40.87 × 3.53 mm NBR 80, back-up ring 42.6 × 48 × 1.4 PTFESupport tube stainless steel 1.4301 / AISI 304Support tube adapter (head/tail) stainless steel 1.4305 / AISI 303M12 connector insert material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pinsM12 flange brass nickel-plated with O-ring 13 × 1.6 NBR 70Electrical installationConnector M12 male plugSupply voltage 12 VDC (tolerance range 8…32 VDC) 24 VDC (tolerance range 8…32 VDC)Current consumption typ. < 100 mA typ. < 50 mALoad (output VDC) RL> 10 k? RL> 10 k?Load current (output VDC) typ. 1 mA typ. 1 mALoud (output mA) RL < 250 ? RL < 500 ?Inrush current max. 2.5 A/2 ms max. 4.5 A/2 msSupply voltage ripple < 1 % p-pPower drain < 1 WOver voltage protection (GND-VDC) up to +36 VDCPolarity protection (GND-VDC) up to ?36 VDCInsulation Resistance R ? 10 M? @ 60 secElectric strength 500 VDC (DC GND to chassis GND)