Nom du Produit: Tecsis FSK01 Test Set For Measurement Of Electrode Forces
Marque: Tecsis
Code Produit: FSK01
Mots-clés: Tecsis
FSK01 Set For Measurement
FSK01 Set For Measurement Forces
Tecsis Test Set Measurement Electrode
FSK01 For Of Electrode
Set Of Electrode
Tecsis FSK01 Test For Measurement Forces
FSK01 Test Set Electrode Forces
Tecsis Set For Measurement Of Electrode
Tecsis FSK01 Test Set Of Electrode Forces
Tecsis FSK01 Test Set For Electrode Forces
Tecsis FSK01 Set For Of
Tecsis FSK01 For Of Electrode Forces
Tecsis FSK01 Test Of
Tecsis FSK01 Test Set Measurement Of
Tecsis Test Set For Electrode
Tecsis FSK01 Set Of Electrode Forces
FSK01 Test Set For Measurement Of Electrode Forces
Tecsis FSK01 Test Set
Tecsis Test Measurement Of
FSK01 Set Measurement Of Electrode Forces
Test Set For Measurement Of Electrode Forces
Êtes-vous intéressé par le produit Tecsis FSK01 Test Set For Measurement Of Electrode Forces du fabricant Tecsis avec le code FSK01? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Tecsis FSK01 Test Set For Measurement Of Electrode Forces de notre équipe de support en direct maintenant!
Applications Measurement of electrode forces for spot welding equipment Special features Measuring ranges 10 kN, 20 kN Relative linearity error 0.2 % Fnom Low overall weight of approx. 6 kg Maximum/Minimum value memory Electrode diameter 14 … 20 mm Description The test set is used for the monitoring of electrode forces for spot welding equipment. The set consists of a force transducer and display unit. To test the forces acting between the electrodes, the force transducer is held between the electrodes. The concave force introduction surfaces centre the force transducer. When the welding electrodes come together, the magnitude of the applied force can be read off the indicator. The force transducer is designed as a shear beam load cell. It is insensitive to lateral forces and moments. The output signal is fed to the indicator via a cable. This also supplies the force transducer with its operating voltage. Alternatively, the supply voltage can also be taken from a PLC. In this type of force transducer, proven thin-film sensor technology is integrated. The laser-welded sensor has all the advantages of conventional glued film strain gauges, without, however, being affected by their major disadvantages (temperature behaviour of the adhesive and creep).CalibrationForce transducer and indicator are calibrated together as a measuring chain. A repeat calibration is recommended every 12 months. This service can be carried out quickly and reliably by WIKA.Scope of deliveryHand-held indicator, force transducer, plastic case, charger, 2 m signal cable, manufacturer's test certificate