Details:

STL Drum Take-up Bearing Housings
STL Plummer Block Housings are manufactured from material GS45. Material quality GGG or GG is also possible on request.
These housings are split and designed for fitting spherical roller bearings with cylindrical bore or with adapter sleeves.
Depending on requirements these housings are supplied as either locating or floating bearings.
HFB Drum Take-up Bearing Housings are equipped with double labyrinth seals at both ends and designed for grease
lubrication. For necessary regreasing, two grease holes are incorporated midway between the bearings. The labyrinth seals
can also be supplied with separate grease holes if required.
Where used as an end bearing housing (Arrangement A) a cast end cover is fitted instead of the labyrinth cover

STL  2211  K		STL  3038  K
STL  2212  K		STL  3040  K
STL  2213  K		STL  3140  K
STL  2216  K		STL  3044  K
STL  2218  K		STL  3144  K
STL  2220  K		STL  3148  K
STL  2222  K		STL  3052  K
STL  2224  K		STL  3152  K
STL  2226  K		STL  3252  K
STL  2228  K		STL  3156  K
STL  3028  K		STL  3160  K
STL  3030  K		STL  2260  K
STL  3132  K		STL  3260  K
STL  3034  K		STL  3164  K
STL  3134  K		STL  3168  K
STL  2236  K		STL  3268  K
STL  3036  K		STL  3272  K
STL  3136  K		STL  3176  K
STL  3236  K		STL  3276  K