Product Name: Italvibras MVSI-ACC Axial Coupling Electric Vibrator
Brand: Italvibras
Product Code: MVSI-ACC
Tags: Italvibras
Axial Electric Vibrator
Vibrator
Coupling Electric Vibrator
Italvibras MVSI-ACC Coupling
Italvibras Axial Vibrator
MVSI-ACC Coupling
MVSI-ACC Axial Coupling Vibrator
Italvibras MVSI-ACC Electric Vibrator
Italvibras Coupling Vibrator
Italvibras MVSI-ACC Coupling
Italvibras Axial Coupling
MVSI-ACC Electric
MVSI-ACC Coupling
Italvibras Axial Coupling Vibrator
MVSI-ACC Axial Electric
MVSI-ACC Coupling
Italvibras MVSI-ACC Coupling Electric
MVSI-ACC Axial Coupling Vibrator
Italvibras MVSI-ACC Axial Coupling Electric
Italvibras MVSI-ACC Axial
Axial Coupling Electric Vibrator
您对制造商Italvibras的产品Italvibras MVSI-ACC Axial Coupling Electric Vibrator，代码为MVSI-ACC感兴趣吗？立即联系我们获取报价。Imtek Engineering，世界上最快最可靠的工业设备供应商，将为您提供最佳报价！
Get Offer With E-Mail: info@im-tek.com
Get a offer for Italvibras MVSI-ACC Axial Coupling Electric Vibrator from our live support team now!
Power supply Three-phase voltage from 230V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency, with constant torque load profile. Polarity All polarities available. Conformity with Standards and Regulations Low Voltage Directive 2006/95/EC; EN/IEC 60034-1; UL 1004-1, CSA C22.2 No.100, NEMA MG-1. Functioning Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions. For detailed information, contact our technical assistance office. Centrifugal force Adjustable in a continuous linear way by varying eccentric weight position. Mechanical protection Do be defined depending by type.Protection against mechanical impacts IK 08 according to IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization Standard on all vibrators, with vacuum encapsulation up to gr. AF 33 and 35, with “drop by drop” trickle system for larger sizes. Ambient temperature From -20°C to +40°C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection With PTC rated thermistor heat detectors 130°C. On request, thermistors with different temperatures and anti-condensation heaters. Fixing of the vibrator In all positions and therefore without restriction. Lubrication All vibrators are correctly lubricated in the factory and do not require further lubrication at start-up. Terminal box Large terminal box to facilitate electrical connection. Special shaped terminals allow for the power supply cable to be secured, whilst protecting it from loosening. Electric motor Three-phase asynchronous type. Designed for maximum starting torques and torque curves specific to requirements of vibrating machines. Insulated windings using vacuum encapsulating up to size AF33 and 35 included; using the “drop by drop” trickle system with class H resin for larger sizes. The rotor is die cast aluminium Casing In high-tensile aluminium alloy up to size 60, in spheroidal cast iron for larger sizes.