EKF S40-NVME Low Profile Mezzanine for Compact PCI Serial CPU Cards

Form FactorProprietary size mezzanine module 84.3mm x 95mmFits basically into the 4HP (20.3mm) envelope of the CPU carrier boardTypically delivered as a ready to use assembly unit (including SC4-CONCERTO or successor CPU card)Mounting position right (on top of a CPU board or CPU side card)Host I/F Connectors HSE1/HSE2High speed mezzanine connectorsSuitable for PCI Express® Gen3, SATA 6G, USB 3.1, DisplayPortBottom mount male connectors HSE1 and HSE2 (high speed expansion)Mating with the carrier card female connectors HSE1/2Board-to-board height 10.0mm for a 4HP assemblyHSE1PCI Express® x4 support (dedicated to the NVMe SSD module M.2 socket1 x USB 3.1 Gen1 5Gbps support (dedicated to the optional Type-C USB front panel connector)Power sourcing 12V/1.5 A maximum continuous current (2 pins)HSE2PCI Express® x4 support (dedicated to PCIe based on-board SATA & USB controllersDisplayPort support (dedicated to Type-C front panel connector configurable for alternate use)Power sourcing 12V/3.0 A maximum continuous current (4 pins)M.2 Module ConnectorsTwo M.2 sockets 3.2H, for 1 x NVMe SSD, 1 x SATA SSD, maximum M.2 size 2280M.2 component height labels S1 - S5 (single sided module) and D1 - D4 (double sided module)Power switches for each socket, undervoltage lockout, short-circuit protection, quick dischargeM1 (NVMe)M.2 NVME SSD module socket, key Id M, PCIe x4 I/FPCIe x4 sourced via HSE1 mezzanine connectorMaximum (theoretical) 32Gbps I/O data transfer rate (Gen3 PCIe 8GT/s)M2 (SATA) - OptionM.2 SATA SSD module socket, key Id B, SATA I/FSourced via on-board PCIe to SATA 6G controller Marvell 88SE9170 (wired to HSE2)Maximum 6Gbps data transfer rateType-C Front Panel Connectors - OptionTwo Type-C front panel receptaclesSuitable for Type-C compliant cable assembliesSupport for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'VBUS over voltage, surge, and ESD protectionUpper Receptacle Type-CHost mode USB 3.1 Gen 1 (5Gbps SuperSpeed), passed through from HSE1 mezzanine connector (CPU carrier card USB host controller e.g. PCH)Downstream Facing Port (DFP) controller and power switch, up to 5V/3A VBUS10Gbps MUX for Type-C flip control (signal flow according to the cable plug orientation)USB 3.1 Gen 2 ready (10Gbps SuperSpeed+) for future CPU chipset generationLower Receptacle Type-CTwo basic operation modes supported:Host mode USB 3.1 Gen 1, sourced from on-board PCIe USB 3.0 host controllerDisplayPort Alternate Mode (VESA ALT Mode), DP video signals derived from HSE2 mezzanine connector (CPU carrier card graphics controller)Active switch fabric with redriver and equalization - support for USB 3.1 Gen1 5Gbps SS and DisplayPort 1.4 4 Lanes 8.1Gbps (DP characteristics in accordance to CPU carrier card GPU)Configurations supported VESA C/D/E/F e.g. USB 3.1, DisplayPort 4 lanes, and concurrent USB 3.1 plus DisplayPort 2 lanesPower switch, up to 5V/3A VBUSApplicationsLow profile mezzanine module for EKF CPU Cards (SC4-CONCERTO and later)4HP assembly CPU carrier board and S40-NVME mezzanine cardM.2 based mass storage, 1 x M.2 SATA socket, 1 x M.2 PCIe x4 socket (NVMe)Optional front panel I/O (2 x Type-C, dual screw locking)Front I/O 1 x USB 3.1 Gen 1, 1 x USB 3.1 Gen1 & DisplayPort alternate modeEnvironmental & RegulatoryDesigned & manufactured in GermanyISO 9001 certified quality managementLong term availabilityRugged solutionCoating, sealing, underfilling on requestLifetime application supportRoHS compliantOperating temperature 0°C to +70°COperating temperature -40°C to +85°C (industrial temperature range) on requestStorage temperature -40°C to +85°C, max. gradient 5°C/minHumidity 5% ... 95% RH non condensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 50.1 yearsEC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)