EKF CG2-SHANTY Compact PCI GPS Receiver Module


EKF CG2-SHANTY Compact PCI GPS Receiver Module Image

Interessieren Sie sich für das Produkt EKF CG2-SHANTY Compact PCI GPS Receiver Module vom Hersteller EKF mit dem Code EKF CG2-SHANTY Compact PCI GPS Receiver Module? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!

Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für EKF CG2-SHANTY Compact PCI GPS Receiver Module von unserem Live-Support-Team!

Board FormFactor3U Eurocard (100x160mm2), front panel width 20.3mm (4HP)Serial InterfacesSP1 (internally)SP2 (externally and internally)SP3, SP4 (optional usage)Device: 16C550 compatible Quad PCI UART Oxford OXmPCI954 asynchronous serial protocol: 1 startbit; 7 or 8 databits; 1 or 2 stopbits; optional even/odd parity; bitrates up to 15MbpsSP1/SP2: typical settings for GPS operation SP1=4800Baud (GPS NMEA-0183), SP2=9600Baud (DGPS RTCM SC-104)SP2 front panel connector: PC compatible D-SUB connector 9-pin male, to be used either as DGPS input or as universal serial COM port, ESD protection 15kV, RS-232E transceiver can be disabled by removing jumper J-SP2 (option)SP3/SP4: on-board pin headers suitable for attachment of CU7-RS485 and CU8-RS232 PHY-modules (option)Serial driver software (COM port emulation) availableGPSExchangeable modular 12-channel receiver, chipset SiRFstarII, SMB jack for 1575,42MHz (L1 Band) GPS antenna, supply 0V (passive antenna), +5V, +3.3V (active antenna) selectable with jumper J-ANTAccuracy (horizontal) better than 3m (CEP), 5m (2 dRMS)Acquisition performance: hot start 8s, warm start 38s, cold start 45sDead Reckoning capabilitySRAM and RTC data non-volatile buffered by Lithium cell 190mAh (>10000h)Selected NMEA-0183 ASCII messages: latitude, longitude, elevation, velocity, heading, time, satellite tracking status, command/control messages (primary serial I/F)SiRF binary protocol: raw data (primary serial I/F)RTCM ASCII protocol (secondary serial I/F)1pps output with better than 1us timing accuracyCompactPCI® Bus32-bit 33MHz (133MB/s)+5V/+3.3V VIO (J1 connector not keyed)Power Consumption+5V ±0.25V 0.1A max.+3.3V ±0.15V 0.15A max.Environmental ConditionsOperating temperature: -40°C ... +85°CStorage temperature: -40°C ... +85°CHumidity 5% ... 95% non-condensingAltitude -300m ... +18000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzEC RegulationsEN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)2002/95/EC (RoHS)MTBFtbd htechnical specifications are subject to change wihout further noticeEKF WinGPSA Windows® Tool to Display GPS Data and Synchronize System TimeOrdering InformationAliasOrdering NumberShort DescriptionSHANTYCG2-1-SHANTY3U CompactPCI hostadapter, 12-channel GPS receiverADAPTCR9-5-ADAPTMechanical kit, expands front panel from 3 U to 6U 940.80.20125.1GPS antenna, active +5V, SMB connector, ~5m cable length 940.80.90100.1External DGPS LW receiver box, including ALF license (Accurate Positioning by Low Frequency, transmitter Mainflingen/Frankfurt, receiver radius about 650km)