| Scale | LIC 4005 |
| Measuring standardCoefficient of linear expansion | Steel scale tape with absolute and incremental METALLUR trackDepends on the mounting surface |
| Accuracy grade | ±5 µm |
| Baseline error | ? ±0.750 µm/50 mm (typical) |
Measuring length (ML)*
in mm | 140 240 340 440 540 640 740 840 940 1040 1140 1240 1340 14401540 1640 1740 1840 1940 2040 |
| Greater measuring lengths of up to 28 440 mm with a single-section scale tape and individual scale carrier sections |
| Mass Scale tape Parts kit Scale tape carrier | 31 g/m80 g + n1) · 27 g187 g/m |
| | | |
| Scanning head | LIC 411 | LIC 419 F | LIC 419 M | LIC 419 P | LIC 419 Y |
| Interface | EnDat 2.2 | Fanuc Serial Interface ?i | Mitsubishi high speed interface | Panasonic Serial Interface | Yaskawa Serial Interface |
| Ordering designation* | EnDat22 | Fanuc05 | Mit03-4 | Mit02-2 | Pana01 | YEC07 |
| Measuring step* (note measuring length limitation2)) | 0.01 µm (10 nm)0.005 µm (5 nm)0.001 µm (1 nm) |
| Calculation time tcalClock frequency | ? 5 µs? 16 MHz | – |
| Traversing speed3) | ? 600 m/min |
| Interpolation error | ±20 nm |
| Electrical connection* | Cable, 1 m or 3 m, with 8-pin M12 coupling (male) or 15-pin D-sub connector (male) |
| Cable length (with HEIDENHAIN cable) | ? 100 m | ? 50 m | ? 30 m | ? 50 m |
| Supply voltage | DC 3.6 V to 14 V |
| Power consumption3) (max.) | At 3.6 V: ? 700 mWAt 14 V: ? 800 mW | At 3.6 V: ? 850 mWAt 14 V: ? 950 mW |
| Current consumption (typical) | At 5 V: 75 mA
(without load) | At 5 V: 95 mA (without load) |
| Vibration 55 Hz to 2000 HzShock 6 ms | ? 500 m/s2 (EN 60068-2-6)? 1000 m/s2 (EN 60068-2-27) |
| Operating temperature | –10 °C to 70 °C |
| Mass Scanning head Connecting cable Connecting element | ? 18 g (without cable)20 g/mM12 coupling: 15 g; D-sub connector: 32 g |
| * Please select when ordering1) n = 1 for ML 3140 mm to 5040 mm; n = 2 for ML 5140 mm to 7040 mm; etc.*2) Mitsubishi: 1 nm: measuring length ? 2040 mm; 5 nm: measuring length ? 10 040 mm; 10 nm: measuring length ? 20 040 mmYaskawa: 1 nm: measuring length ? 1840 mm; 5 nm: measuring length ? 9040 mm; 10 nm: measuring length ? 18 040 mm3) See General electrical information in the Interfaces of HEIDENHAIN Encoders brochure |
