Function - Thermostat:
For liquids level detection in reservoirs and
agent temperature monitoring.
The guide tube is connected to the flange by
means of a cutting-ring union. Thus it is
possible to shorten subsequently a tube
which is too long.
Upon reaching the firmly set response
temperature, a bimetal disk that can be
influenced by the temperature will switch
(see Order designation). The thermostat ist
situated in the lower part of the conductor
piece and can be exchanged.
CU-alloy
For inductive an capacitive loads, suppressor circuits shall be provided for.
(Diode, RC element, varistor)
In the guidance pipe there are three
switching elements at maximum locked on a
hole strip with hole spaces of 10 mm. The
switching function is bi-stable. When turning
the contacts by 180°, the switching function
can be reversed (the opener contact
becomes the closer contact and vice versa).
By loosening the cap screws the switching
elements can subsequently be changed in
their functions and replaced.
Operating pressure max: 8 bar
Temperature range: 0...80 °C
Mounting position: vertically ± 20°
Material: Tube
Flange Al-alloy
Float 1.4571
Protection type: IP 65
Plug-in connection: DIN 43651
Weight at L=300: 0,65 kg
Weight/100mm additional length: 0,05 kg
Switching voltage: 10...250 VUC
Switching current max.: 0,5A
Switching power max.: 40/60 W/VA
Switching voltage: 10...250 VUC
Switching element max.: 6,3A(cos 0,6)
Tolerance of response: ±6%
Hysteresis at max.: 18°C