EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces


EKF DU1-MUSTANG XMC Mezzanine Module  Dual Isolated RS-485 Asynchronous Interfaces Image

EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces


Produktname: EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces
Marke: EKF
Produktcode: EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces
Stichwörter: EKF
Artikel: DU1-MUSTANG
EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces



Interessieren Sie sich für das Produkt EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces vom Hersteller EKF mit dem Code EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!

Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für EKF DU1-MUSTANG XMC Mezzanine Module Dual Isolated RS-485 Asynchronous Interfaces von unserem Live-Support-Team!

Form factor XMC single-width mezzanine card 139mm x 74mmStack height 10mm XMC to hostHost I/F Connector P15 XMC - PCI Express, single lane, single linkOption P15 connector according to XMC 2.0 (white housing)+3.3V operated (VPWR not in use)PCI Express® bridge to dual-port UARTPLX Oxford 950 UART w. 128-byte transmit/receive FIFOAsynchronous baud rates up to 15MbpsWindows® & Linux device driver support5kV rms isolation barrier RS-485/RS-422 transceivers (Analog Devices)Configurable as half or full duplex±15 kV ESD protection on RS-485 input/output pinsData rate 16 MbpsConnect up to 256 nodes on one bus (driver enable control via DTR)Open- and short-circuit, fail-safe receiver inputsHigh common-mode transient immunity >25 kV/µsThermal shutdown protectionTwo front bezel male 9-pin D-Sub connectorsRS-485 ports isolated against each other and board circuitry (limited to 250VAC by D-Sub connector characteristics)On-board DIP-switches for full/half-duplex setting, and line termination on/offLong Term AvailabilityCoating, Sealing, Underfilling on RequestRoHS compliant 2002/95/ECOperating temperature: 0°C ... +70°C (industrial temperature range on request)Storage temperature: -40°C ... +125°C, max. gradient 5°C/minHumidity 5% ... 95% non condensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 121.5 yearsEC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1) subject to technical changesOrdering InformationPlease refer to List 22 for popular DU1-MUSTANG SKUsDU1-MUSTANG • D-SUB Connectors Pin Assignment