Mts Sensor C OEM ANALOG Position Sensors

Produktname: Mts Sensor C OEM ANALOG Position Sensors
Marke: Mts Sensor
Produktcode: C OEM ANALOG
Stichwörter: Mts Sensor Sensor OEM ANALOG Mts Sensor C OEM Position Sensors Mts Sensor ANALOG Position Sensor C ANALOG Mts C ANALOG Position Mts Sensor ANALOG Sensors C OEM Position Sensor ANALOG Position Mts C ANALOG Mts OEM ANALOG Mts C Position Sensors OEM ANALOG Position Sensors Mts Sensor C ANALOG Position Sensor C OEM ANALOG Sensors Mts C OEM ANALOG Position Sensors Mts Sensor C OEM ANALOG Position Mts OEM ANALOG Sensors Sensor C OEM Position Sensors Mts C ANALOG Sensors Mts C OEM ANALOG Position
Position Sensors

Interessieren Sie sich für das Produkt Mts Sensor C OEM ANALOG Position Sensors vom Hersteller Mts Sensor mit dem Code C OEM ANALOG? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!

Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Mts Sensor C OEM ANALOG Position Sensors von unserem Live-Support-Team!

PRODUKTDETAILS

nputMeasured value: PositionStroke length: 72, 109, 128, 148, 162, 186, 194, 217, 250 mmOutputVoltage: 0.1 - 4.9 VDCResolution: analog output signalSignal without magnet: not specifiedFeature: At 5 VDC operating voltage output is ratiometric to operating voltageAccuracyLinearity: ± 0.15 mm by means of magnet 401842, between 5 % and 95 % of stroke lengthZero tolerance: ± 1 mmHysteresis: ± 25 µmRepeatability: ± 25 µmTemperature coefficient: ± 0.005 % per °CUpdate time: 500 Hz (2 ms)Operation conditionsOperating temperature: -40 °C…+75 °CStorage temperature: -20 °C…+85 °CPressureup to 2500 m altitudeIP ProtectionIP303 - DIN 40 050 Part 9 – Protection against foreign bodies – Protected against foreign bodies from Ø 2.5 mm0 - DIN 40 050 Part 9 – Protection against water – No protectionEnvironmental testingShock test: IEC-68-2-2710 g (11 ms) –> Single hit10 g (11 ms) 1000 shocks per axisVibration test: IEC 60068-2-6 (10…2000 Hz) 10 g Sinus (resonance frequencies excluded)EMC-test: Emission according to EN 61000-6-4 CISPR 16-2-3 – Disturbance field strength (measurement distance 3 m) CIPSR 16-2-1 – Disturbance current (DC voltage supply) Immunity according to EN 61000-6-2EN 61000-4-2 – Electrostatic discharge (ESD) (Compliance only with corresponding protection housing, see H2 and M1)EN 61000-4-3 – Radiated electrosolenoidic radio-frequency, free radiated (Compliance only with corresponding protectionhousing, see H2 and M1)EN 61000-4-4 – Electrical fast transient (Burst)EN 61000-4-5 – SurgeEN 61000-4-6 – Conducted radio-frequency, line guidedEN 61000-4-8 – Power frequency solenoidic fieldForm factor, materialHousing: POMProtective pipe: nylon blueElectrical connectionSupply voltage: CS: 5 VDC (tolerance range 4.75 - 5.5 VDC), CM: 12 VDC (tolerance range 9 - 15 VDC)Max. power consumption: max. 40 mAOutput load: analog: > = 10 k?Overvoltage protection: CS: up to 19 VDC short termCM: up to 29 VDC short termPolarity protection: VDC - GNDOperating voltage quality: CS: 5 VDC CM: 12 VDCLoad control: ± 0.1 % ± 0.15 %Grid control: ± 0.05 % ± 0.05 %Ripple: < 50 mVpp < 100 mVppMechanical connectionScrew connection: 2 screws M3 x 37, max. tightening torque 0.4 Nm, with 3 mm bore holeTerminal connection: by means of O-rings (consultation with MTS required)